x

Technical Questions

Description

If you have any technical questions about bars and tunings etc. post them hear and our resident vibe geek Nico vanderPlas will answer them!

Forum Topic: M75 "Thumping"

rfrench5 24 January 2014

Greetings,

I'm back at my lovely M75. So I have been noticing there is a pronounced 'thumping' on all of the black keys from middle Bb to the end of the instrument range. When I say 'thumping' when I hit any of those black keys, whether the dampening bar is pressed on or off, there is a annoying thump - along with the bar note.

This thumping only seems to affect the black keys from middle Bb upwards. None of the white keys seems to be affected.

Things I have tried to resolve the thumping:

Forums

Forum Topic: Replacing posts in Musser M58

hajbo 26 September 2013

I am helping to refurbish a used Musser M58 vibe for my daughter's high school band. Several of the hook and saddle posts were broken off, with the root (to use a dentist term) still stuck in the mounting hole. We managed to extract them with some difficulty, and noticed that there was some glue in the bottom of the holes which was what made the posts so hard to pull out. We are waiting for some replacements, I am thinking we should pot them into the holes with something similar to mount them firmly in the frame.

Forums

Forum Topic: M75 Conversion

Wiesty 19 September 2013

First post here on the vibe forums!
I was wondering if it was possible to do a conversion from a musser m75 to an m55? I own a musser 75 and from what I know they use the same bars. Do they use the same resonators? Does anyone make m55 frames? It would be nice to have an m55 or something lighter that would be easier for travelling while still being able to use the same bars/resonators if possible.

Forums

Forum Topic: M75 Dampening Issue

rfrench5 5 April 2013

I just purchased a very nice M75 from a guy in town. I tried it out with and without dampening and it sounded great.

So we break it down, and I drive it home, and assemble it back together.
The dampening on the lower octave is poor, no dampening; the higher register is OK and so far no issues.
I've fiddled with the dampening controls and took out the bars, placed them back in, along with the frame pieces. At least 3 times. Still the dampening is almost non existent on the lower register.

Forums

Forum Topic: Motor Issues

Reedsmith 7 June 2012

Hi there

Fairly new on here, hoping to get busy soon... moving to vibes from (but not excluding) woodwinds, so serious learning curve likely in some areas...

I was quite lucky in acquiring a small gigging vibe- vintage, not everyone's first choice. Sounds great, though. I'm in England, and bought the vibes from a brilliant US vendor ... and they made it here, despite our 'Royal' Mail (USPS were fine).

Forums

Forum Topic: Bar to resonator spacing.

suzi01 18 February 2012

I'm building a graduated bar F3 to F6 vibe from scratch using 60.60.T5 aluminium here in Queensland Australia.I have finished all the bars (going up 2 cents every octave on advice from the pianist in my jazz group who is a piano tuner by trade). I've been able to tune the 1st overtone up to Bflat 4. I used 10mm thick bar.

How do I find the best spacing between under the bars and the top of the resonators for best balance of volume and sustain? I am not using fans, so there are no cutouts at the resonator mouths but will use electronics to get some amplified vibrato/tremelo.

Forums

Forum Topic: Height Adjustment

Mark Johnson 11 January 2012

I just got one of those new frames put on my Musser, and I really love the new stability, wheels that stay on and wheels that really lock!

HOWEVER, I am interested in the height adjustment. I have played the vibes many years at that 'standard' level. But I am six feet, and it occurs to me that it might be more ergodynamic to raise the instrument a notch. This would mean that I would stand more upright, and perhaps give a better angkle of mallet attack.

I tried this out, but was a little too weirded by the added 5 cm, so I put it back.

Forums

x
⇡